Axtron 300 GPD RO Plant – Complete 5 Stage Reverse Osmosis System with Booster Pump
The Axtron 300 GPD RO Plant is a complete, ready-to-install 5-stage reverse osmosis system, built around a genuine Filmtec membrane and an Eflow booster pump, with everything needed for installation included on one frame. Produces up to 45 litres of purified water per hour.
What's Included in Axtron 300 GPD RO Plant
- 3x 20-Inch RO Slim Grey Housings (1-Inch): Reinforced polypropylene, mounted on a shared frame.
- Stage 1 – Axtron Gold Slim PPF 5 Micron Cartridge: First-pass sediment removal.
- Stage 2 – Axtron Gold Slim PPF 5 Micron Cartridge: Second-pass sediment removal, extending total sediment capacity before the membrane.
- Stage 3 – Axtron CTO Slim 20 Inch Cartridge: NSF certified carbon block filter, removes chlorine before it can damage the membrane.
- Stage 4 – Filmtec 300 GPD RO Membrane: Genuine Filmtec (DuPont Water Solutions) TFC membrane, up to 99.4% salt rejection.
- Stage 5 – Axtron Post Carbon T33 Cartridge: Final taste and odor polishing after the membrane, coconut shell activated carbon.
- Eflow 300 GPD Diaphragm Booster Pump: Boosts feed pressure to the membrane for consistent output.
- Complete Fitting Kit: Pipe and fittings, housing key, chrome faucet, 10mm and 6mm connection pipe, ball valve, and power adapter for the pump.
How the 5 Stages Work Together
Raw water first passes through two sediment stages in sequence (Stages 1 & 2), removing dust, rust, and silt while extending total sediment capacity before reaching the membrane. Stage 3, the CTO carbon block, removes chlorine — critical because chlorine damages RO membranes over time. The Eflow booster pump then raises water pressure to the level the membrane needs to operate efficiently, and Stage 4, the Filmtec 300 GPD membrane, removes up to 99.4% of dissolved salts, heavy metals, and other contaminants using Thin Film Composite technology. Finally, Stage 5, the post carbon cartridge, polishes the water's taste and odor immediately before it reaches your faucet.
Real Output: 300 GPD Rating vs. Practical Litres Per Hour
"300 GPD" is the membrane's nameplate rating under standard test conditions — it doesn't mean the system produces water continuously at that rate around the clock. In practical use, boosted by the Eflow pump, this system produces up to 45 litres per hour while actively running, typically filling a storage tank rather than running continuously. That 45L/hour figure is what you'll actually notice day to day.
Why Choose This Axtron 300 GPD RO Plant System
- Genuine Filmtec Membrane: Not a generic membrane — Filmtec is manufactured by DuPont Water Solutions, a globally recognized name in RO membrane technology.
- Double Sediment Protection: Two sediment stages ahead of the carbon and membrane stages mean less fouling and longer component life.
- Complete, Ready-to-Install Kit: Frame, all cartridges, membrane, booster pump, faucet, pipes, and fittings — nothing separate to source.
- Boosted Performance: The included Eflow booster pump ensures consistent pressure and output even where incoming water pressure is inconsistent.
- Built for Pakistani Water Conditions: Double sediment filtration is particularly useful for tanker-supplied or borewell water with heavier particulate loads.
Where This Axtron 300 GPD RO Plant Fits
- Homes and Offices Needing Reliable RO Output: 90L/hour practical output suits medium-to-larger households and small offices.
- Areas with Inconsistent Water Pressure: The booster pump compensates for low incoming pressure.
- Tanker or Borewell Water: Double sediment pre-filtration handles the heavier particulate loads common in these sources.
- Semi-Commercial Use: Small offices, clinics, and similar settings needing more consistent output than a basic domestic system.
Technical Specifications
| Specification | Detail |
|---|---|
| System Type | 5-Stage complete RO plant |
| Practical Output | Up to 45 Litres/hour |
| Housings | 3x 20-Inch RO Slim Grey, 1-Inch ports, reinforced polypropylene |
| Stage 1 & 2 | Axtron Gold Slim PPF, 5 Micron (sediment removal) |
| Stage 3 | Axtron CTO Slim 20 Inch (carbon block, chlorine removal) |
| Stage 4 | Filmtec 300 GPD RO Membrane, TFC technology, up to 99.4% salt rejection |
| Membrane Operating Pressure | 50–100 PSI |
| Membrane Max Temperature | 113°F (45°C) |
| Membrane Lifespan | 2–3 years with proper maintenance |
| Stage 5 | Axtron Post Carbon T33, coconut shell activated carbon |
| Post Carbon Lifespan | Up to 12 months / 72,000 litres |
| Booster Pump | Eflow 300 GPD Diaphragm Booster Pump |
| Included Accessories | Chrome faucet, ball valve, 10mm and 6mm pipe, housing key, power adapter |
Frequently Asked Questions
Q1: What does "300 GPD" mean, and does this system really produce that much?
300 GPD is the membrane's nameplate rating under standard lab test conditions, not a guaranteed 24-hour output figure. In practical use with the included booster pump, this system produces up to 45 litres per hour while actively running.
Q2: What's included in this Axtron 300 GPD RO plant?
The complete frame with 3 housings, two sediment cartridges, one carbon block cartridge, a Filmtec 300 GPD membrane, a post carbon cartridge, an Eflow 300 GPD booster pump, plus faucet, pipes, fittings, and housing key.
Q3: Why does this system use two sediment cartridges?
Two sediment stages in sequence extend total sediment-holding capacity before water reaches the carbon and membrane stages, reducing fouling and extending their working life — useful for tanker or borewell water with heavier particulate loads.
Q4: Is the membrane a genuine Filmtec membrane?
Yes — Filmtec membranes are manufactured by DuPont Water Solutions, a globally recognized RO membrane brand.
Q5: How long do the various components last?
Sediment cartridges: replace regularly based on water quality. Carbon block: per standard CTO replacement guidance. The Filmtec membrane: 2–3 years with proper pre-filtration and maintenance. Post carbon cartridge: up to 12 months or 72,000 litres.
Q6: Why is a booster pump included?
It raises feed water pressure to the level the RO membrane needs to operate efficiently, ensuring consistent output even where incoming water pressure is low or inconsistent.
Q7: Is this suitable for tanker or borewell water?
Yes — the double sediment pre-filtration stage is well suited to the higher particulate loads common in tanker-supplied or borewell water.
Q8: Is delivery available across Pakistan?
Yes, Axtron Pakistan offers nationwide delivery, including Karachi, Lahore, Islamabad, Rawalpindi, Faisalabad, and Multan.