Axtron 9 Stage RO Plant with UV Sterilizer – Without Stand & Gauge (Made in Vietnam)

Axtron 9 Stage RO Plant with UV Sterilizer – Without Stand & Gauge (Made in Vietnam)

For homes that don't need a floor-standing unit — or simply want to save some space and cost — the Axtron 9 Stage RO Plant with UV Sterilizer is also available without the metal stand and pressure gauge. The filtration performance is identical to our standard model: the same 150 GPD Vietnam-made RO system, the same 9-stage purification process, and the same UV sterilization stage for extra protection against bacteria and viruses — particularly useful for homes relying on tanker water in Karachi, Hyderabad, and similar cities.

What's Different in This Version?

Nothing about the water purification changes. The stand and pressure gauge are convenience features, not purification stages — removing them doesn't affect filtration quality. What you get instead:

• A wall-mountable, space-saving design that fits under counters or against a wall without needing floor clearance for a stand
• A ₨2,000 lower price (₨49,500 vs. ₨51,500 for the stand & gauge version)
• The same core system, just without a built-in way to visually monitor system pressure

How the 9-Stage Purification Process Works

1. Stage 1 – PPF Sediment Pre-Filter: Removes dust, sand, and rust particles.
2. Stage 2 – GAC (Granular Activated Carbon): Removes chlorine and improves taste.
3. Stage 3 – CTO (Carbon Block): Further removes chlorine and chemical residues.
4. Stage 4 – RO Membrane (150 GPD): Removes up to 99% of dissolved solids, heavy metals, bacteria, and viruses.
5. Stage 5 – Post Carbon Filter: Polishes taste before the water moves to storage.
6. Storage Tank (6 Gallon): Purified water is held here until you open the tap.
7. Stage 6 – Mineral Cartridge: Restores essential minerals lost during RO filtration.
8. Stage 7 – Alkaline Filter: Balances pH for healthier drinking water.
9. Stage 8 – Nano Silver Cartridge: Provides antibacterial protection to water in storage.
10. Stage 9 – UV Sterilizer: Final disinfection stage, neutralizing bacteria and viruses right before the water reaches your tap.

Technical Specifications

What's Included in the Box

• Complete 9-stage RO + UV unit (wall-mounted configuration, no stand/gauge)
• 6-Gallon storage tank
• Faucet and connection hose
• Spare PPF, GAC, and CTO pre-filter cartridges
• Installation hardware and wrench

Installation & Power Requirements

This system requires two separate power connections — one for the RO unit and one for the UV sterilizer — both on properly earthed switches/sockets.

Since this version has no stand, the unit is typically fixed to a wall or a firm, level surface by your installer. Because there's no enclosure hiding the booster pump and UV ballast wiring (visible in the product photos), secure mounting away from moisture, direct handling, and children's reach is especially important.

⚠️ Important Safety Notice — UV Sterilizer

• The UV sterilizer should be installed by a trained technician.
• Keep the UV chamber and its exposed wiring out of reach of children, and avoid unnecessary contact with the unit by anyone in the household.
• The UV lamp operates at high voltage. If the lamp, quartz sleeve, or chamber is ever cracked or damaged, do not touch it. Disconnect the power immediately and contact Axtron Pakistan for inspection or replacement — a damaged unit carries a risk of electric shock through earthing/leakage faults.
• Always use a properly earthed socket for the UV sterilizer's power connection.
• Because this version has no stand enclosure, make sure the unit is mounted securely and the booster pump/UV ballast wiring is kept clear of water splashes.

Maintenance

• Pre-filters (PPF, GAC, CTO): Replace every 3–4 months.
• RO Membrane: Typically lasts 18–24 months, depending on water quality and usage.
• UV Lamp: Replace approximately every 9,000 hours (roughly 12 months) to maintain full disinfection effectiveness.

Which Version Should You Choose?

Frequently Asked Questions

Q1: Is the stand and pressure gauge necessary for this RO plant to work properly? No. This without stand & gauge model performs identically in terms of water purification. The stand and gauge mainly provide easier system monitoring and added physical stability — without them, the unit is simply wall-mounted or fixed in place, saving ₨2,000 and some space.

Q2: What is the difference between this and the with-stand version? Only the mounting and monitoring convenience. Both use the same 150 GPD Vietnam-made RO system, the same 9 filtration stages, and the same UV sterilizer. The with-stand version additionally includes a metal frame for floor placement and a pressure gauge for monitoring.

Q3: Do I need the UV stage if I already use bore water? The RO membrane already removes the vast majority of contaminants, including bacteria. The UV stage is an additional safeguard, especially recommended for tanker water users or households wanting maximum protection. It's optional — not mandatory — for bore water users.

Q4: How many power connections does this system need? Two. The RO unit and the UV sterilizer have separate power adapters and should be connected to two separate, properly earthed switches or sockets.

Q5: Is it safe that the pump and wiring are visible without a stand? Yes, when installed correctly by a trained technician and mounted securely on a wall or fixed surface, away from moisture and out of children's reach. Avoid touching the UV chamber directly, and if it's ever cracked or damaged, disconnect power immediately and contact us.

Q6: How often does the UV lamp need to be replaced? Approximately every 9,000 hours of use (roughly 12 months of typical household use), to maintain full disinfection effectiveness.

Q7: Is delivery and installation available across Pakistan? Yes, Axtron Pakistan offers free COD and nationwide delivery, with installation support in Karachi, Lahore, Islamabad, Rawalpindi, Multan, and other major cities.