Axtron 9 Stage RO Plant with UV Sterilizer – Reverse Osmosis Water Filter with Stand & Gauge (Made in Vietnam)

Axtron 9 Stage RO Plant with UV Sterilizer

Homes that rely on tanker water — common across Karachi, Hyderabad, and many other areas of Pakistan without access to bore water — face a specific challenge: water can sit in storage tanks for days before it reaches your tap, giving bacteria time to grow even after initial treatment. The Axtron 9 Stage RO Plant with UV Sterilizer is built for exactly this situation. It takes our proven Axtron 8 Stage RO Plant (150 GPD, Made in Vietnam) and adds a dedicated UV sterilization stage, giving your water a final safeguard right before it reaches your glass.

Why Add a UV Stage to Your RO Plant?

Reverse osmosis already removes the large majority of dissolved solids, heavy metals, and microorganisms through the membrane stage. UV disinfection works differently — it's a chemical-free process that neutralizes bacteria and viruses that may be present in water sitting in storage tanks, especially relevant for:

• Homes supplied by water tankers (no continuous municipal chlorination)
• Areas without bore water access
• Households with children, elderly family members, or anyone wanting an extra layer of protection
• Water stored for extended periods before use

Built for Homes Without Bore Water — Karachi, Hyderabad & Beyond

Most RO systems in Pakistan are designed with bore water's high TDS and salinity in mind. Tanker water is different — the core concern isn't dissolved salts, it's inconsistent source quality and the time water spends sitting in storage tanks before use. The UV stage addresses this directly, making this system a practical choice for tanker-dependent households in Karachi, Hyderabad, and other cities across Pakistan where bore water isn't available.

How the 9-Stage Purification Process Works

1. Stage 1 – PPF Sediment Pre-Filter: Removes dust, sand, and rust particles.
2. Stage 2 – GAC (Granular Activated Carbon): Removes chlorine and improves taste.
3. Stage 3 – CTO (Carbon Block): Further removes chlorine and chemical residues.
4. Stage 4 – RO Membrane (150 GPD): Removes up to 99% of dissolved solids, heavy metals, bacteria, and viruses.
5. Stage 5 – Post Carbon Filter: Polishes taste before the water moves to storage.
6. Storage Tank (6 Gallon): Purified water is held here until you open the tap.
7. Stage 6 – Mineral Cartridge: Restores essential minerals lost during RO filtration.
8. Stage 7 – Alkaline Filter: Balances pH for healthier drinking water.
9. Stage 8 – Nano Silver Cartridge: Provides antibacterial protection to water in storage.
10. Stage 9 – UV Sterilizer: A final disinfection step that neutralizes bacteria and viruses right before the water reaches your tap.

Technical Specifications

What's Included in the Box

• Complete 8-stage RO unit with metal stand and pressure gauge
• UV Sterilizer with its own dedicated power adapter
• 6-Gallon storage tank
• Faucet and connection hose
• Spare PPF, GAC, and CTO pre-filter cartridges
• Installation hardware

Installation & Power Requirements

This system requires two separate power connections — one for the RO unit's control box and one for the UV sterilizer's controller. Both should be connected to properly earthed switches/sockets; do not run both from a single shared, unearthed extension board.

The UV sterilizer can be installed in either configuration:

• Mounted directly on the RO plant stand (as supplied), or
• Positioned separately, commonly 2–3 feet away from the main unit, for households that prefer extra physical separation

Both setups are fully supported — our installation team can advise on the best option for your kitchen layout when you order.

⚠️ Important Safety Notice — UV Sterilizer

• The UV sterilizer should be installed by a trained technician.
• Keep the UV chamber and its wiring out of reach of children, and avoid unnecessary contact with the unit by anyone in the household.
• The UV lamp operates at high voltage. If the lamp, quartz sleeve, or chamber is ever cracked or damaged, do not touch it. Disconnect the power immediately and contact Axtron Pakistan for inspection or replacement — a damaged unit carries a risk of electric shock through earthing/leakage faults.
• Always use a properly earthed socket for the UV sterilizer's power connection.

Maintenance

• Pre-filters (PPF, GAC, CTO): Replace every 3–4 months for consistent performance.
• RO Membrane: Typically lasts 18–24 months, depending on water quality and usage.
• UV Lamp: Replace approximately every 9,000 hours (roughly 12 months) — even if the lamp still glows, its disinfection strength decreases over time, so timely replacement matters.

Who Should Choose This System

• Homes supplied by water tankers (Karachi, Hyderabad, and other tanker-dependent areas)
• Homes without bore water access
• Families with children, elderly members, or anyone wanting extra protection against bacteria and viruses
• Customers looking for the highest level of protection in Axtron's domestic RO range

Frequently Asked Questions

Q1: What is the difference between the 8 Stage and 9 Stage RO Plant? The core filtration process is identical — both use the same 150 GPD Vietnam-made RO system, tank, and stand. The 9-stage version adds a dedicated UV sterilizer as a final disinfection step, giving extra protection against bacteria and viruses, particularly useful for tanker water or water stored for long periods.

Q2: Do I need the UV stage if I already use bore water? The RO membrane already removes the vast majority of contaminants, including bacteria. The UV stage is an additional safeguard, especially recommended for tanker water users or households wanting maximum protection. It's optional — not mandatory — for bore water users.

Q3: Can I add the UV sterilizer to my existing 8 Stage RO Plant instead of buying the full 9-stage unit? Yes. If you already own our Axtron 8 Stage RO Plant, you can purchase the UV Sterilizer separately and have it installed as an add-on.

Q4: How many power connections does this system need? Two. The RO unit and the UV sterilizer have separate power adapters and should be connected to two separate, properly earthed switches or sockets.

Q5: Is it safe to touch the UV sterilizer? The unit is safe during normal operation when installed correctly, but you should avoid unnecessary contact with the UV chamber and wiring, and keep it out of reach of children. If the lamp, quartz sleeve, or chamber is ever cracked or damaged, do not touch it — disconnect the power immediately and contact us, as damage can create an earthing/shock risk.

Q6: Can the UV unit be installed away from the main RO plant? Yes. It can be mounted directly on the RO plant stand (as supplied) or positioned separately — commonly 2–3 feet away — for households that prefer extra separation. Both configurations are supported.

Q7: How often does the UV lamp need to be replaced? The UV lamp is rated for approximately 9,000 hours of use (roughly 12 months of typical household use), after which it should be replaced to maintain full disinfection effectiveness.

Q8: Is delivery and installation available across Pakistan? Yes, Axtron Pakistan offers free COD and nationwide delivery, with installation support in Karachi, Lahore, Islamabad, Rawalpindi, Multan, and other major cities.